10″ Internal Pneumatic Clamp (IPC10)
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- Filters, lubricators, regulators and valves all rated to 250 psi
- Fully hardened dowel pins
- Nose cone made of 5⁄8″ diameter CF round bar
- 3 Section Clamp – No frame – Nose cone only
- Three section, self-centering clamp has an extra clamping section to assure proper line-up in the pipe to avoid lost time for high-low adjustments. *Standard in sizes 10″ through 14″
- Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
- Air tubes are electro statically plated to reduce corrosion
- Spring mounted air tank
- Remote operated by reach rod
Technical Specifications:
| Pipe Size Range | 10″ (254 mm) |
| Wall Thickness Range | .125″ – .5″ (3.18 – 12.7 mm) |
| Standard Length | 68″ (1727.2 mm) |
| Width | 10″ (254 mm) |
| Height | 10″ (254 mm) |
| Weight | 235 lbs (107 kg) |
| Working Air Pressure | 180 – 220 psi |
| Air Motor | Non Powered |
| Air Tank | 2 gal |
| Clamping Shoes | 15 total clamp shoes , 12 shoes at the joint (6 on each section) 3 shoes on rear section |
| Cylinder | 6″ (152 mm) |
| Climbing Capacity | N/A |
