16-18″ Internal Pneumatic Clamp (IPC16-18)
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- Filters, lubricators, regulators and valves all rated to 250 psi
- Fully hardened dowel pins
- Nose cone made of seamless 4130 steel for durability
- Clamp frame is built using 11⁄2″ x 3⁄8″ angle iron to create a strong, durable frame
- Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
- Darby uses only the highest quality high pressure quick exhausts
- Air tubes are electro statically plated to reduce corrosion
- Two Stage Stainless Steel Air Tank: Rigid mounted air tank for 40′ joints; Large trailer tank for 60′ and 80′ joints available
- Remote operated by reach rod
- Most clamps can cover two pipe sizes through the use of conversion kits
- All powered clamps have a 25° climbing capability
- Powered line travel on models 16″ to 60 ” for easy operational mobility through the pipe
Technical Specifications:
| Pipe Size Range | 16″ – 18″ (406 – 457 mm) |
| Wall Thickness Range | .125″ – .500″ (3.18 – 12.7 mm) on 16″ (406 mm) .125″ – .750″ (3.18 – 19.0 mm) on 18″ (457 mm) |
| Standard Length | 100″ (2540 mm) |
| Width | 14″ (356 mm) |
| Height | 14″ (356 mm) |
| Weight | 545 lbs (247 kg) |
| Working Air Pressure | 180 – 220 psi |
| Air Motor | .9 hp Cleco |
| Air Tank | 10 gal w/ 3 gal reserve |
| Clamping Shoes | 16 total clamp shoes, 8 on each section |
| Cylinder | 8″ (203 mm) |
| Climbing Capacity | 25° + slope |
