6-20″ Pipe Bending Machine (HPB6-20)
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- 17 gal fuel tank
- Parker 4 section hydraulic control valve for bending operations and optional hydraulic mandrel operation / 40 gpm
- 35 gal hydraulic tank, 30 gal fill capacity
- Oil compressor in compressor drive circuit
- Frame cross tubes supporting hydraulic cylinders have 3/8″ wall thickness
- Machine side plates reinforced with stiffeners in key locations; Mulit-pass welding for optimal frame life and strength; Side plates made from 5/8″ T1 steel; Die nest plates made from 1″ T-1 steel; all welds are pre heated and heat controlled and all welds are made ‘in position’
- 10 Micron hydraulic return line filtration
- Murphy Control panel w/ electric start, throttle control, oil pressure, tachometer and hour meter
- Parker Seal Lok hydraulic systems prevents leaks and has a working pressure rating of 3000 psi
- Pinup fully reinforced to prevent spreading
- Repairable hydraulic cylinders with Parker Seals which come apart without cutting to enable easy seal repair
Performance:
- Maximum bending force at front of stiffback 207,000 lbs
- Air compressor with 240 psi maximum continuous pressure
- Hydraulic vane pump for main bending circuit, 28 gpm @ 2400 rpm, 3000 psi
Options:
- Dual tires for added stability
- Tracks for reduced ground pressure
- Deutz Diesel Engine (air cooled)
Technical Specifications:
| Length | 13’6″ (4114.8 mm) |
| Width | 6’8″ (2032 mm) |
| Height | 8’6″ (2590.8 mm) |
| Weight | 11,120 lbs (5043.9 kg) (w/o bending set) |
| Engine | CAT C4.4 80 hp @ 2400 rpm |
| Winch | WARN 12,000 lb Hydraulic Planetary Winch |
| Air Compressor | Quincy 325 LVD Air Compressor w/ Hydraulic Drive |
| Cylinders | (2) 7″ Outboard Cylinders w/ 11″ Stroke |
| (2) 7″ Inboard Cylinders w/ 6″ Stroke | |
| Hydraulic Pump | Denison Dual Pump |
| Oil Cooler | American Industrial |
