22-36″ Pipe Bending Machine (HPB22-36)
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- 35 gal (133 Litre) fuel tank
- 5 section hydraulic control valve for optional hydraulic mandrel operation as well as bending operations
- 120 gal (454 Litre) hydraulic tank, 100 gal (379 Litre) fill capacity
- Oil cooler in compressor drive circuit
- Machine side plates reinforced with stiffeners in key locations; Multi-pass welding for optimal frame life and strength; Side plates made from 1″ T1 steel; Die nest plates made from 1-1/2″ T-1 steel; all welds are pre heated and heat controlled and all welds are made in position
- Dual hydraulic filtration, pressure and return
- Murphy Control panel w/ electric start, throttle control, oil pressure, tachometer and hour meter
- Parker Seal-Lok™ hydraulic systems prevents leaks and has a working pressure rating of 3000 psi
- Repairable hydraulic cylinders with Parker Seals come apart without cutting to enable easy seal repair
- 15 ton CAT style triple grouser tracks
Performance:
- Maximum bending force at front of stiffback 763,000 lbs
- Air compressor with 240 psi maximum continuous pressure
- Hydraulic vane pump for main bending circuit, 74 gpm @ 2200 rpm, 3000 psi
Technical Specifications:
| Length | 24’6″ (7467.6 mm) |
| Width | 9’1″ (2768.6 mm) |
| Height | 9’3″ (2819.4 mm) |
| Weight | 51,000 lbs (23,133 kg) (w/o bending set) |
| Engine | CAT C6.6 Turbo Diesel 173 hp @ 2200 rpm |
| Winch | Ramsey 20,000 lb Powermaster® Winch |
| Air Compressor | Quincy 390 Compressor w/ Hydraulic Drive |
| Cylinders | (4) 9″ (229 mm)Outboard Cylinders w/ 19″ Stroke |
| (4) 7″ (178 mm) Inboard Cylinders w/ 6″ Stroke | |
| Hydraulic Pump | Denison Main Pump, Parker Piston Pump for Compressor Drive |
| Oil Cooler | American Industrial |
