12-14″ Internal Pneumatic Clamp (IPC12-14)
FEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
- Filters, lubricators, regulators and valves all rated to 250 psi
- Fully hardened dowel pins
- Nose cone made of seamless 4130 steel for durability
- 3 Section Clamp – No frame – Nose cone only
- Three section, self-centering clamp has an extra clamping section to assure proper line-up in the pipe to avoid lost time for high-low adjustments. *Standard in sizes 10″ through 14″
- Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
- Air tubes are electro statically plated to reduce corrosion
- Spring mounted air tank
- Remote operated by reach rod
- Most clamps can cover two pipe sizes through the use of conversion kits
Technical Specifications:
| Pipe Size Range | 12″ – 14″ (305-356 mm) |
| Wall Thickness Range | .125″ – .500″ (3.18 – 12.7 mm) on 12″(305 mm) .125″ – .750″ (3.18 – 19.05 mm) on 14″(356 mm) |
| Standard Length | 65″ (1651 mm) |
| Width | 11″ (279 mm) |
| Height | 11″ (279 mm) |
| Weight | 270 lbs (123 kg) |
| Working Air Pressure | 180 – 220 psi |
| Air Motor | Non Powered |
| Air Tank | 2 gal |
| Clamping Shoes | 15 total clamp shoes , 12 shoes at the joint (6 on each section) 3 shoes on rear section |
| Cylinder | 6″ (152 mm) |
| Climbing Capacity | N/A |
