Model 670 (67.5 v) – Portable
Wet Sponge1-20 Mils for Paints and Epoxy Paint Coatings
THE NEW SPY® MODEL 670 operates on a single 9-volt alkaline battery. Unit output voltage is 67.5 volts DC. This voltage makes the detector highly sensitive and accurate. Compact and light weight with no bulky battery packs allowing for non- destructive inspection of paints, epoxy paints and coatings 1-20 Mils.
Inspect large surfaces faster and with less operator fatigue using a quick attach, easy to use roller sponge electrode (Optional Accessory).
Product Features
Fast and easy non-destructive inspection of paints, epoxy paints and coatings 1-20 mils:
- NEW Ergonomic, Balanced, Lightweight Handheld Design.
- NEW Rugged, Durable Construction
- 67.5 Volt DC-Sensitive and Accurate
- NEW Quick Change Battery Compartment
- A NEW Wide Range of Quick Change Accessories
- NEW Inspection Kit w/Carrying Case (Optional)
Included with 670
1 – 25 ft ground cable
1 – 4 oz. Wetting Agent
1 – 9 Volt Battery
1 – Operating Instruction
Technical Specs
Voltage Type: DC
Voltage Range (kV): 67.5 Volts
Voltage Output Accuracy: ±5%
Coating Range (Min-Max): 1 – 20 mils
Operating Temperature: 33°F to 148°F
Holiday Indicator Type: Audible/Visual
Battery: 9 Volt Battery
Battery Life: Dependent Upon Load Applied (Number of Holidays)
Low Battery Indicator: Yes
Unit Weight Only: 0.9 lbs
Unit Weight With Battery Only: 1.8 lbs
Unit Dimensions (LxWxH): 9” x 4.5” x 3.25”
With Wand: 25” x 4.5” x 8”
Domestic/International Standards Unit Complies With: NACE SP0188-2006
Factory Warranty: 3 Month
Included With Kit
1 – Carrying/Shipping Case
1 – Roller Sponge Axle
3 – Spare Roller Sponges
2 – 14.5” Extension Shafts
1 – Spare Flat Sponge (4” X 8” X 2”)
1 – 35ft Ground Cable
1 – Foam Wand Handle
1 – Wand Signal Cable
1 – 40 oz. Wetting Agent
2 – 9 Volt Batteries
1 – Shoulder Strap
