46-48″ Internal Pneumatic Clamp (IPC46-48)

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

  • Filters, lubricators, regulators and valves all rated to 250 psi
  • Fully hardened dowel pins
  • Nose cone made of seamless 4130 steel for durability
  • Clamp frame is built using 2″ x 3⁄8″ angle iron and 2″ x 1⁄4″ WT square tubing to create a strong, durable frame
  • Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
  • Darby uses only the highest quality high pressure quick exhausts
  • Air tubes are electro statically plated to reduce corrosion
  • Extra 4.7 gallon air tank with check valve reserves air for multiple actuations of rear roller brackets
  • Remote operated by reach rod
  • Most clamps can cover two pipe sizes through the use of conversion kits
  • All powered clamps have a 25° climbing capability
  • Powered line travel on models 16″ to 60″ for easy operational mobility through the pipe

Technical Specifications:

Pipe Size Range 46″ – 48″ (1167 – 1219 mm)
Wall Thickness Range .375″ – .750″ (9.5 – 19 mm)
Standard Length 148″ (3759 mm)
Width 42″ (914 mm)
Height 42″ (914 mm)
Weight 3700 lbs (1678 kg)
Working Air Pressure 180 – 220 psi
Air Motor (2) 2.7 hp Drive Motors – Side Drive
Air Tank 80 gal w/ 4.7 gal reserve
Clamping Shoes 48 total clamp shoes, 24 on each section
Cylinder 14″ (356 mm)
Climbing Capacity 25° + slope

PDF

46-48″ Internal Pneumatic Clamp (IPC46-48) Brochure