36-38″ Internal Pneumatic Clamp (IPC36-38)

Features/Advantages:

Filters, lubricators, regulators and valves all rated to 250 psi
Fully hardened dowel pins
Nose cone made of seamless 4130 steel for durability
Clamp frame is built using 2″ x 3⁄8″ angle iron and 2″ x 1⁄4″ WT square tubing to create a strong, durable frame
Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
Darby uses only the highest quality high pressure quick exhausts
Air tubes are electro statically plated to reduce corrosion
Extra 3.0 gallon air tank with check valve reserves air for multiple actuations of rear roller brackets
Remote operated by reach rod
Most clamps can cover two pipe sizes through the use of conversion kits
All powered clamps have a 25° climbing capability
Powered line travel on models 16″ to 60″ for easy operational mobility through the pipe

Technical Specifications:

Pipe Size Range	36″ – 38″ (914 – 965.2 mm)
Wall Thickness Range	.375″ – .750″ (9.5 – 19 mm)
Standard Length	144″ (3658 mm)
Width	32″ (813 mm)
Height	32″ (813 mm)
Weight	3435 lbs (1558 kg)
Working Air Pressure	180 – 220 psi
Air Motor	2.7 hp Drive Motor
Air Tank	80 gal w/ 3 gal reserve
Clamping Shoes	40 total clamp shoes, 20 on each section
Cylinder	12″ (305 mm)
Climbing Capacity	25° + slope